In a 2026 randomised trial, 56 adults who needed a back-tooth crown were given either a permanent crown printed in resin or a monolithic zirconia crown. Within a year, six of the printed crowns had fractured, compared with two of the zirconia crowns. The difference was not statistically significant, and the margins of the printed crowns fitted as well as those of the zirconia crowns, but the printed crowns showed several times more wear. That mix of encouraging fit and open questions about durability sums up where printed permanent crowns sit today.
A 3D-printed permanent crown is built layer by layer from a light-cured resin that contains ceramic filler particles. It is a different material from the resin used for printed temporaries, and manufacturers market it for long-term use. This article sets out what the studies show so far, where the gaps are, and who might reasonably consider one.
The material is a filled resin, not a ceramic
Despite names that mention ceramic, the permanent printing resins on the market are composites: a plastic matrix holding fine ceramic particles. That puts them in the same family as the composite blocks a dentist or lab can mill, rather than alongside lithium disilicate (e.max) or zirconia.
Being a composite may have some advantages. In a laboratory study of milled composite, printed composite and ceramic crowns (Zimmermann and colleagues, Clinical Oral Investigations, 2019), all the particle-filled composite crowns made only 0.5 mm thick survived fatigue testing, unlike the ceramic crowns. The authors concluded that composite materials may have advantages over ceramics where the restoration has to be very thin. The abstract reports this for the milled particle-filled composites, so it should not be read as a result for printed crowns. The trade-offs show up elsewhere: strength in bending, stiffness, hardness and colour stability.
Printed resin tests weaker than milled resin
Several recent reviews have compared printed definitive resins with materials made by milling.
- A meta-analysis of six laboratory studies (Sampaio and colleagues, Journal of Prosthetic Dentistry, 2026) found milled composite resins had higher flexural strength in three-point bending, higher microhardness and a higher elastic modulus than printed ones. In biaxial bending tests the difference was not significant.
- A systematic review of 42 studies covering seven printing resins (Flottes and colleagues, Journal of Prosthetic Dentistry, 2026) found all of them remained below most milled composite blocks for flexural strength, surface roughness and hardness. Colour was acceptable when the samples had not been exposed to staining drinks.
- An umbrella review of 14 systematic reviews (Dascanio and colleagues, Journal of Dentistry, 2026) concluded that printed resins generally had lower strength, stiffness, fatigue resistance and colour stability, and higher water sorption and solubility, than milled materials. Fit was usually within clinically acceptable limits.
These are mostly bench tests, so they show how the materials compare rather than how long a crown will last in a mouth. The umbrella review also rated most of the reviews it included as low or critically low in quality.
How printing and finishing change the result
A printed crown is not finished when it comes off the printer. It is washed to remove uncured resin and then cured again under light. These steps can change how the finished material behaves.
The umbrella review found that fit depended strongly on washing, curing and the angle at which the crown was printed. A 2026 laboratory study of three permanent crown resins (Abdulai and colleagues, Clinical Oral Investigations) found that longer post-curing raised hardness and the degree of polymerisation in all three, by different amounts for each brand. A chemical analysis of four printing resins, two for temporaries and two for permanent crowns (Prawatvatchara and colleagues, Journal of Dentistry, 2026) found the amount of leftover monomer released into artificial saliva varied markedly between products.
A systematic review of post-processing and biocompatibility (Cabrol and colleagues, Journal of Prosthetic Dentistry, 2025) found that most post-processed printed resins were reported not to be toxic to cells in laboratory tests, but it could not identify an ideal protocol, and only one of its 27 included studies was an in vivo study. The practical point is that results belong to a specific resin processed in a specific way, not to "printed crowns" as a whole.
What happened in patients so far
Clinical studies are few, small and short. The most useful ones are below.
| Study | What was placed | Follow-up | Main finding |
|---|---|---|---|
| Shin and colleagues, Journal of Dentistry, 2026 (randomised trial) | 56 adults needing a back-tooth crown, randomised to printed resin or monolithic zirconia | 1 year | 6 printed and 2 zirconia crowns fractured (difference not significant); 7 of the 8 fractures were on the most posterior restored tooth; printed crowns wore more; margin fit, gum health and satisfaction similar |
| Sonkaya and Bek Kürklü, International Journal of Prosthodontics, 2025 | 33 overlays and endocrowns on premolars and molars in 30 patients, one dentist | 2 years | All rated clinically acceptable; staining at the margins increased, with the share rated best for margin colour falling from 100% to 69.7% |
| Mangano and colleagues, Journal of Dentistry, 2025 (retrospective) | 185 short-span restorations on implants in 145 patients | 1 to 2 years | All still in use; success (no complications) 95.1% |
In the randomised trial, measured wear on the biting surface averaged about 92 micrometres for the printed crowns against about 14 for zirconia over the year. The authors called the results acceptable for fit but said the greater wear and numerically higher number of fractures may raise concerns about durability for printed crowns used as permanent back-tooth restorations.
For comparison, ceramic crowns have a much larger clinical record: a 2015 systematic review (Sailer and colleagues, Dental Materials) pooled 54 clinical studies of all-ceramic single crowns and estimated their survival over five years. Our article on how thick an e.max crown needs to be covers some of the longer series, and zirconia crown wear on the opposite tooth looks at how hard ceramics behave against natural teeth.
Where a printed permanent crown might fit
The umbrella review described printed resins as viable options for temporaries and for selected permanent restorations, while noting that long-term durability remains uncertain. On the current evidence, a printed permanent crown may be worth discussing with your dentist when:
- a tooth needs covering for a period while a longer-term plan is worked out, for example while the bite is being changed or gum health is being stabilised
- the person understands that the long-term durability of these crowns is not yet known and that the crown may need replacing sooner than a ceramic one
It may be less suited to the most posterior tooth in the arch, where the trial saw most of its fractures, and to front teeth where long-term colour matters, given the weaker colour stability in the laboratory data.
Printed resin crowns for baby teeth in children are a separate topic with their own studies, and are not covered here.
How this relates to Lumi

Lumi has an in-house lab with 3D printing. For permanent crowns, Lumi uses e.max (lithium disilicate) and also offers zirconia. 3D-printed permanent crowns are not something we offer at this stage. If you are weighing materials, ceramic vs zirconia crowns compares the main options, and 3D printing in dentistry explains what printers are used for more broadly.
For dentists: three checks before seating a printed definitive crown
First, follow the resin maker's wash and post-cure protocol exactly, including the curing unit. Abdulai and colleagues (2026) found hardness and conversion rose with longer post-curing in a brand-dependent way, and Prawatvatchara and colleagues (2026) found residual monomer elution differed markedly between products. Both are laboratory studies, so the size of any clinical effect is unknown.
Second, think twice about the terminal tooth in the arch. In the Shin trial, 7 of 8 fractures across both groups were on the most posterior restored tooth, and that position was significantly associated with fracture. It is a single one-year trial in 56 patients, so treat it as a signal rather than a rule.
Third, consider air-abrading the intaglio surface with alumina before bonding. A systematic review of in vitro bond strength studies (Kagaoan and colleagues, Journal of Dentistry, 2024; six studies) found no single best cement, but alumina air abrasion was generally recommended. Settings vary between studies and products, so check the manufacturer's instructions.
Questions we are often asked
Is a printed permanent crown the same as a temporary crown?
No. Permanent printing resins are made and marketed for long-term use, while temporary resins are intended for short-term use, and their chemical make-up differs between products. Both are made by 3D printing, which is why the names can be confusing.
Do printed crowns stain?
The laboratory reviews found printed resins less colour-stable than milled materials, and the two-year clinical study saw more staining at the margins over time. How much this shows depends on the tooth, the diet and the specific resin.
How long will a printed permanent crown last?
No one knows yet. Clinical follow-up so far runs to about two years, which is too short to estimate lifespan. Ceramic crowns have been followed for much longer.
Sources
- Shin H, Oh KC, Kim JH. Evaluation of full-veneer crowns fabricated with 3D printing resin material for definitive prostheses: a 1-year randomized controlled prospective study. Journal of Dentistry, 2026. PubMed 42843776
- Dascanio R and colleagues. How durable are 3D-printed dental resin-based composites? An umbrella review. Journal of Dentistry, 2026. PubMed 41819275
- Sampaio GN and colleagues. Evaluation of mechanical properties of CAD-CAM composite resins for milled versus 3D printed definitive restorations: a systematic review and meta-analysis. Journal of Prosthetic Dentistry, 2026. PubMed 40506304
- Flottes Y and colleagues. Properties of 3D printed resins for definitive dental restorations: a systematic review. Journal of Prosthetic Dentistry, 2026. PubMed 41419355
- Sonkaya E, Bek Kürklü GZ. Additively manufactured definitive crown resins on premolar and molar teeth: 2-year results of a prospective clinical study. International Journal of Prosthodontics, 2025. PubMed 39486004
- Mangano FG and colleagues. Additively manufactured hybrid composite implant-supported restorations: a retrospective clinical study of 145 patients with up to 2 years of follow-up. Journal of Dentistry, 2025. PubMed 40716554
- Zimmermann M and colleagues. Fracture load of CAD/CAM-fabricated and 3D-printed composite crowns as a function of material thickness. Clinical Oral Investigations, 2019. PubMed 30368664
- Abdulai D, Sasany R, Özcan M. Influence of post-curing duration on degree of conversion, microhardness, and surface roughness of three commercially available 3D-printed permanent crown resins. Clinical Oral Investigations, 2026. PubMed 42946839
- Prawatvatchara W and colleagues. Comparative LC-MS analysis of monomer composition and elution from provisional and permanent 3D-printed dental resins. Journal of Dentistry, 2026. PubMed 41276065
- Cabrol A and colleagues. Effectiveness of postprocessing on 3D printed resin biocompatibility in prosthodontics: a systematic review. Journal of Prosthetic Dentistry, 2025. PubMed 39304492
- Kagaoan Z and colleagues. Factors influencing the bond strength of additively manufactured crown materials in dentistry: a systematic review of in vitro studies. Journal of Dentistry, 2024. PubMed 38432351
- Sailer I and colleagues. All-ceramic or metal-ceramic tooth-supported fixed dental prostheses (FDPs)? A systematic review of the survival and complication rates. Part I: Single crowns (SCs). Dental Materials, 2015. PubMed 25842099
If a tooth has been recommended for a crown and you would like to talk through the material choices, you can book an appointment at our Melrose Park practice or read about crowns and bridges at Lumi.
This article is general information only and is not a substitute for an in-person assessment by a dental professional.









