Book Online

All health funds accepted · Payment plans available, humm from $0 deposit · CDBS bulk billing

All health funds accepted · Payment plans available, humm from $0 deposit · CDBS bulk billing

Book online

A Lumi team member in green scrubs photographing a seated, smiling person under two studio lights in the clinical photography room

THE LUMI BLOG

Why a crown can look grey, chalky or too white

A new crown can look greyish, chalky or too bright next to your own teeth. Here is what research shows about dried-out teeth, crown materials and cement colour.

Dr James Tran, dentist at Lumi Dental Melrose Park

Dr James Tran

November 21, 2026 · Patient Education · 9 min read

A new crown that looks right under the dental light can look greyish, chalky or a little too white once you see it next to your own teeth at home. There is often a reason that can be traced: the shade was taken after the teeth had dried out, the material is more opaque than the teeth around it, or the cement and the tooth underneath have changed the final colour. Several of these can be checked before the crown is fixed in place.

This article explains each cause, what the research shows about it, and what can be done before and after a crown is fitted. If the grey shows only as a line at the gum, our article on a dark line at the gum around a crown covers that separately.

Teeth become lighter as they dry out

Natural teeth change colour when they dry, and they become lighter. In a randomised trial at King's College London, 20 people had one upper front tooth isolated with a rubber dam while the matching front tooth acted as a control. The isolated teeth became measurably lighter, a panel of examiners could see the difference in photographs, and the authors concluded that the colour change had still not fully returned 30 minutes after the teeth were allowed to rehydrate (Burki and colleagues, Journal of Dentistry, 2013).

A later study of 32 people at the University of North Carolina found colour changes above the perceptibility threshold (the difference about half of observers can see) within the first minute of drying, and 90% of teeth were still above that threshold 15 minutes after rinsing (Suliman and colleagues, Journal of Esthetic and Restorative Dentistry, 2019). If the shade is chosen after a long time with the mouth open, the crown may be made to match a tooth that is lighter than it usually is. The crown can then look too bright against the teeth once they have rehydrated.

Some materials let less light through

Enamel is more translucent than the dentine beneath it, so a natural tooth does not reflect light like a solid white surface (Paravina and colleagues, Journal of Esthetic and Restorative Dentistry, 2025). Crown materials differ in how much light they let through. Zirconia is the strongest of the dental ceramics, but a review in the Journal of Dental Research noted that conventional zirconia lacks the appearance of glass ceramics and has therefore been somewhat restricted for front teeth (Zhang and Lawn, 2018). Newer zirconias have been developed to be more translucent, and in a laboratory comparison lithium disilicate (the material in e.max) let more light through than two zirconias, including a 5Y zirconia, a higher translucency type (Elzoughary and colleagues, 2024). Our article on zirconia types and translucency explains the grades.

There is a trade-off. A laboratory study in the Journal of Prosthetic Dentistry tested ceramics over a metal or a tooth-coloured background and found that materials with an opaque framework were less translucent but matched the target shade better, while more translucent samples changed colour more when cement was added (Rajati Haghi and colleagues, 2025). An earlier laboratory study found that the colour underneath, such as metal, changed the measured colour of ceramics, and its authors noted that discoloured tooth structure or a metal post can affect the final result (Volpato and colleagues, Dental Materials, 2009). A more opaque material can help cover a dark base, but beside more translucent natural teeth it may look flatter or more opaque. A more translucent crown over a dark base may let some of that darker colour show through. Masking a dark tooth is covered in more detail in our article on crowns and veneers over a dark tooth.

The cement and the thickness underneath change the result

With thin, translucent ceramics, what is behind the crown becomes part of its colour. In one laboratory study of four monolithic ceramics, the colour of the resin cement had the largest effect on the final colour, and the change was greatest with 0.5 mm thick samples and white cement. With white cement at that thickness, every material except a monolithic zirconia exceeded the study's acceptability threshold (Cızıroğlu and colleagues, BMC Oral Health, 2025). Our article on bonded and cemented crowns explains the cement types.

Dentists can try a restoration in with a try-in paste to preview the effect of a cement shade. A laboratory study of thin porcelain veneers found that try-in pastes did change the overall colour, which can help with matching, but the paste and the set cement of the same shade were not identical, so the authors advised caution in relying on the try-in alone (Alghazali and colleagues, European Journal of Prosthodontics and Restorative Dentistry, 2018).

A treatment room at Lumi Dental with a 3D scan of the teeth shown on the screen
A 3D scan records the shape of the teeth; colour is best checked with more than one method.

How big a difference people notice

Colour research uses two thresholds. In a multicentre study with 175 observers, including lay people, half of observers could see a difference between two ceramic samples at a CIEDE2000 value of 0.8, and half judged a difference of 1.8 to be unacceptable (Paravina and colleagues, Journal of Esthetic and Restorative Dentistry, 2015). These are 50:50 thresholds, not fixed limits. The study found that thresholds differed between groups of observers, so some people notice smaller differences than others.

Taking a shade is harder than it looks. A literature review concluded that dental spectrophotometers were the most accurate and precise method, but that they still depend on controlled clinical conditions (Tabatabaian and colleagues, 2021). In a 2026 clinical comparison that used a spectrophotometer as the reference, exact shade agreement was low for both an intraoral scanner and visual observers, although agreement was much better for value, the lightness or darkness of a tooth (Baqleh and Alhouri, Clinical and Experimental Dental Research, 2026). Our guide to tooth shade matching explains hue, chroma and value.

Whitening, and what can be done afterwards

A crown is made to match your teeth as they are at the time. If you are thinking about whitening, it is worth raising this with your dentist before the shade is chosen, and our article on whitening with veneers or crowns explains the order to consider. In a laboratory study, zirconia and lithium disilicate kept their colour and lightness well through simulated coffee staining and a 14-day carbamide peroxide bleaching course (Shirani and colleagues, International Journal of Prosthodontics, 2026). Whitening your other teeth later should not be expected to lighten a zirconia or lithium disilicate crown.

If a crown still looks wrong once it is fitted, talk to your dentist. They can look at it with you in different lighting, check whether the surrounding teeth have rehydrated, and explain the options, including whether the crown would need to be replaced. Our article on removing a zirconia or e.max crown explains how a bonded ceramic crown is taken off.

Crowns at Lumi

Lumi uses e.max (lithium disilicate) and offers zirconia, and the practice has a 3D intraoral scanner, a clinical photography room and an in-house lab. Our crowns and bridges page has more about crowns at Lumi, and current offers are listed on our deals page.

For dentists: take the shade before the teeth dry out

Record the shade, and any shade photographs, at the start of the appointment, before isolation, retraction or long periods of mouth opening. Suliman and colleagues found colour change beyond the perceptibility threshold within the first minute of isolation and incomplete rehydration after 15 minutes, and Burki and colleagues concluded that perceivable change was still present after 30 minutes of rehydration. If a shade has to be checked at a later visit, it may be worth doing before any drying. When evaluating a try-in, remember that try-in paste and the set cement of the same shade may not look identical (Alghazali and colleagues). Limits: both dehydration studies were small (20 and 32 participants), Burki measured upper central incisors only, and in Burki's data lightness (L*) alone was no longer significantly different from baseline after 30 minutes of rehydration. The translucency, cement and bleaching studies were laboratory work on flat specimens, and the try-in study used veneers on bovine teeth, not crowns in the mouth. Cızıroğlu and colleagues did not test a dark background. The 0.8 and 1.8 thresholds come from ceramic pairs viewed in a booth, and the scanner comparison involved 16 patients and one scanner.

Questions about crown colour

Why does my crown look fine in photos but grey in the mirror?

The type of light can change how a ceramic looks, and the colour underneath a crown can also show through (Volpato and colleagues, 2009). The teeth around the crown may also have been drier, and lighter, when the shade was chosen. Your dentist can check the crown with you in more than one light.

Can a crown be whitened?

Whitening gels are not expected to lighten zirconia or e.max crowns in a useful way. In laboratory testing, zirconia and lithium disilicate kept their colour well during a bleaching course (Shirani and colleagues, 2026).

Is a zirconia crown always more opaque than e.max?

Not always. Zirconias vary by grade, and newer types have been developed to be more translucent than older ones. In the laboratory comparison above (Elzoughary and colleagues), lithium disilicate was still the most translucent of the three materials compared.

Sources

  • Burki Z and colleagues. A randomised controlled trial to investigate the effects of dehydration on tooth colour. Journal of Dentistry, 2013. PubMed 23160038
  • Suliman S and colleagues. Effect of time on tooth dehydration and rehydration. Journal of Esthetic and Restorative Dentistry, 2019. PubMed 30801926
  • Paravina RD and colleagues. Translucency of enamel and dentin: a biomimetic target for esthetic dental materials. Journal of Esthetic and Restorative Dentistry, 2025. PubMed 40371940
  • Zhang Y and Lawn BR. Novel zirconia materials in dentistry. Journal of Dental Research, 2018. PubMed 29035694
  • Elzoughary AA, Hamza TAR and Metwally MF. Effect of hydrothermal aging on color stability and translucency of two zirconia generations compared to lithium disilicate ceramics. Journal of Dental Research, Dental Clinics, Dental Prospects, 2024. PubMed 39386127
  • Rajati Haghi H and colleagues. Effect of ceramic type, cement shade, and ceramic thickness on the optical properties of the definitive restoration and the ability to mask a metal substructure. Journal of Prosthetic Dentistry, 2025. PubMed 40467375
  • Volpato CA and colleagues. Optical influence of the type of illuminant, substrates and thickness of ceramic materials. Dental Materials, 2009. PubMed 18602686
  • Cızıroğlu N, Tuncer EB and Kara R. Effect of ceramic thickness and resin cement colors on the final color of various monolithic CAD/CAM materials. BMC Oral Health, 2025. PubMed 40618088
  • Alghazali N and colleagues. The effect of try-in paste and resin cement shade on colour properties of dental veneers. European Journal of Prosthodontics and Restorative Dentistry, 2018. PubMed 30152958
  • Paravina RD and colleagues. Color difference thresholds in dentistry. Journal of Esthetic and Restorative Dentistry, 2015. PubMed 25886208
  • Tabatabaian F and colleagues. Visual and digital tooth shade selection methods, related effective factors and conditions, and their accuracy and precision: a literature review. Journal of Esthetic and Restorative Dentistry, 2021. PubMed 34498789
  • Baqleh AS and Alhouri N. Clinical accuracy of an intraoral scanner for tooth shade selection compared with a spectrophotometer and visual matching: a comparative study. Clinical and Experimental Dental Research, 2026. PubMed 41914403
  • Shirani M and colleagues. Effect of thermocycling and bleaching on the color stability and lightness of monolithic CAD/CAM dental ceramics. International Journal of Prosthodontics, 2026. PubMed 40627021
Dr James Tran, dentist at Lumi Dental, Melrose Park

Written by Dr James Tran

Dr James Tran (BDent, University of Sydney; Graduate Diploma in Oral Implants) is a general dentist at Lumi Dental in Melrose Park. The team writes these articles to give clear, evidence-based dental information to help you make informed decisions about your care.

Inside Lumi Dental, Melrose Park

New patients

Your first visit is $149

A full 60 minute first visit with a check-up, clean, X-rays and a treatment plan. Usually $654, offer ends 31 December 2026. With most health funds there is no gap.

Open Monday to Saturday, and until 9:30pm on Thursdays. Free undercover parking at Melrose Central.